中文版
Home Material ASTM F468-2012
简体 | 繁體
Grade F468X Al 2024-T4
USA UNS A92024
Corresponding Standard ASTM F468-2012
Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification Aluminum and Aluminum Alloys
F468X Al 2024-T4 Chemical Element Composition Content (%)
Component Fe Si Mn Cr Cu Ti Zn Mg Other Individual Other Total More
Minimum Value - - 0.3 - 3.8 - - 1.2 - - Al:Balance； Ti+Zr≤0.2
Maximum Value 0.5 0.5 0.9 0.1 4.9 0.15 0.25 1.8 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
F468X Al 2024-T4 Mechanical Properties
Tensile Strength
σb
ksi 		Yield Point
σs
ksi 		Elongation or Extension Rate
δ
% 		Hardness
HBW
55~70 ≥36 ≥10 HRB
70~85
1 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy
China Japan United States International Organization for Standardization Germany European Standard
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN
2024 2024
A92024 		2024 A92024 AlCu4Mg1 A92024 AlCu4Mg2 3.1355
A92024 		EN-AW-AlCu4Mg1
2 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy
China Japan United States International Organization for Standardization France European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade NF EN/NF EN GOST
2024(A) 2024(A)
A92024 		2024(A) A92024 AlCu4Mg1(A) A92024 A-UG1
2024(A)
A92024 		EN-AW-AlCu4Mg1 Д16Ч
1160
3 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy
China United States International Organization for Standardization Germany European Standard Russia
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN GOST
2A12
(LY12) 		2024 2024 A92024 AlCu4Mg1 A92024 AlCu4Mg2 3.1355
A92024 		EN-AW-AlCu4Mg1 Д16/160

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!