F468Y Al 6061-T6 A96061 - ASTM F468-2012

Grade	F468Y Al 6061-T6
USA UNS	A96061
Corresponding Standard	ASTM F468-2012 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification	Aluminum and Aluminum Alloys

F468Y Al 6061-T6 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.4	-	0.04	0.15	-	-	0.8	-	-	Al:Balance
Maximum Value	0.7	0.8	0.15	0.35	0.4	0.15	0.25	1.2	0.05	0.15	Al:Balance

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

F468Y Al 6061-T6 Mechanical Properties

Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
37~52	≥31	≥10	HRB 40~50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!