F468AT Ti 1 R50250 - ASTM F468-2012

Grade	F468AT Ti 1
USA UNS	R50250
Corresponding Standard	ASTM F468-2012 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification	Titanium and Titanium Alloys

F468AT Ti 1 Chemical Element Composition Content (%)

Component	Fe	C	N	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	-	-	-	-	Ti:Balance
Maximum Value	0.2	0.1	0.05	0.0125	0.18	0.1	0.4	Ti:Balance

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

F468AT Ti 1 Mechanical Properties

	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
Full-Size Specimen	35~70	≥30		HV 140~160
Machined Specimen	≥35	≥25	≥24

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	Japan	United States		International Organization for Standardization	Germany		France	Russia
GB	JIS	ASTM	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST
TA1	Class 2 Ti≥99.49	Grade 1	R50250	Grade 1(Ti≥99.53)	Ti2(Ti≥99.50)	3.7035	T-40(Ti≥99.54)	ВТ1-00(Ti99.57)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!