中文版
Home Material ASTM B152/B152M-2019
简体 | 繁體
Grade B152 C11000
SAE
Steel Number		 CA110
Old Grade
Corresponding Standard ASTM B152/B152M-2019
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
Classification Copper and Copper Alloys
B152 C11000 Chemical Element Composition Content (%)
Component Cu
Minimum Value 99.9
Maximum Value -
B152 C11000 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Hardness
HBW
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - 1/8 Hard (H00) 220~275 HR(F Scale)
54~82
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - 1/8 Hard (H00) 220~275 HR(Superficial 30T)
≤49
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - 1/4 Hard (H01) 235~290 HR(F Scale)
60~84
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - 1/4 Hard (H01) 235~235 HR(Superficial 30T)
18~51
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - 1/2 Hard (H02) 255~315 HR(F Scale)
77~89
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - 1/2 Hard (H02) 255~315 43~57
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - 3/4 Hard (H03) 285~345 HR(F Scale)
82~91
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - 3/4 Hard (H03) 285~345 47~59
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - Hard (H04) 295~360 HR(F Scale)
86~93
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - Hard (H04) 295~360 54~62
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Cold Working - Very Hard (H06) 325~385 HR(F Scale)
88~95
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Cold Working - Very Hard (H06) 325~385 56~64
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 cold-rolled Spring(H08) 345~400 HR(F Scale)
91~97
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 cold-rolled Spring(H08) 345~400 60~66
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 cold-rolled Extra spring(H10) ≥360 HR(F Scale)
≥92
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 cold-rolled Extra spring(H10) ≥61
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Hot Rolled (M20) 205~260 ≥70 HR(F Scale)
≤75
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Hot Rolled (M20) 205~260 ≥70 ≤41
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Hot Rolled and Annealed (O25) 205~260 ≥70 HR(F Scale)
≤65
Thick plates, rolled bars, thin plates, strips; t ≥ 0.3 Hot Rolled and Annealed (O25) 205~260 ≥70 ≤31
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Soft Annealing (O60) HR(F Scale)
≤65
Thick plates, rolled bars, thin plates, strips; t ≥ 0.5 Deep Drawing Annealing (O68) HR(F Scale)
30~75

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!