C2801 C2801 R C2801 RS - JIS H 3100-2018 - H2ABC

中文版

Grade	C2801
Other Names
Corresponding Standard	JIS H 3100-2018 Copper and copper alloy sheets, plates and strips
Classification	Copper and Copper Alloys
Properties	Strength Machinability

C2801 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	More
Minimum Value	-	59	-	Zn：余量
Maximum Value	0.07	62	0.1	Zn：余量

C2801 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
Plate (P), Strip (R, RS); 0.3≤t≤1	C2801 P-O,C2801 R-O,C2801 RS-O	Annealing (O)	≥325	≥35	-
Plate (P); 1<t≤30	C2801 P-O	Annealing (O)	≥325	≥40	-
Strip (R, RS); 1<t≤3	C2801 R-O,C2801 RS-O	Annealing (O)	≥325	≥40	-
Plate (P); 0.3≤t≤30	C2801 P-1/4H	1/4 Hard (1/4H)	355~440	≥25	HV 85~145
Strip (R, RS); 0.3≤t≤3	C2801 R-1/4H,C2801 RS-1/4H	1/4 Hard (1/4H)	355~440	≥25	85~145
Plates (P); 0.3≤t≤20	C2801 P-1/2H	1/2 Hard (1/2H)	410~490	≥15	105~160
Strip (R, RS); 0.3≤t≤3	C2801 R-1/2H,C2801 RS-1/2H	1/2 Hard (1/2H)	410~490	≥15	105~160
Sheet (P); 0.3≤t≤10	C2801 P-H	Hard (H)	≥470	-	≥130
Strip (R, RS); 0.3≤t≤3	C2801 R-H,C2801 RS-H	Hard (H)	≥470	-	≥130

Approximate Comparison Table Cupper and cupper alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C2801	C28000	CuZn40	CuZn40	2.0360	CuZn40	CuZn40	CW509L	L60	CZ109

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!