A325 Type 3 A - ASTM A325-2014

Grade	A325 Type 3 A
Corresponding Standard	ASTM A325-2014 Structural bolts, steel, heat treated 120/105 ksi minimum tensile strength
Classification	Alloy Steel

A325 Type 3 A Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni	Cu
Heat Analysis	Minimum Value	0.33	0.15	0.9	-	-	0.45	0.25	0.25
Heat Analysis	Maximum Value	0.4	0.35	1.2	0.035	0.04	0.65	0.45	0.45

	Component	C	Si	Mn	P	S	Cr	Ni	Cu
Product Analysis	Minimum Value	0.31	0.13	0.86	-	-	0.42	0.22	0.22
Product Analysis	Maximum Value	0.42	0.37	1.24	0.04	0.045	0.68	0.48	0.48

A325 Type 3 A Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
1/2 ~ 1	≥825	≥635	≥14	≥35	253~319
＞1 ~ 1-1/2	≥725	≥560	≥14	≥35
1-1/8 ~ 1-1/2	≥725	≥560	≥14	≥35	223~286

A325Type3A Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!