A325 Type 3 C - ASTM A325M-2014

Grade	A325 Type 3 C
Corresponding Standard	ASTM A325M-2014 Structural bolts, steel, heat treated 830 Mpa minimum tensile strength
Classification	Alloy Steel

A325 Type 3 C Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	V
Heat Analysis	Minimum Value	0.15	0.15	0.8	-	-	0.3	0.25	0.2	0.02
Heat Analysis	Maximum Value	0.25	0.35	1.35	0.035	0.04	0.5	0.5	0.5	-

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	V
Product Analysis	Minimum Value	0.14	0.13	0.76	-	-	0.27	0.22	0.17	0.01
Product Analysis	Maximum Value	0.26	0.37	1.39	0.04	0.045	0.53	0.53	0.53	-

A325 Type 3 C Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
≥830	≥660	≥14	≥35	253~319

A325Type3C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!