S20200 - ASTM A276/A276M-2017

USA UNS	S20200
ASTM Specification or Grade	202
Corresponding Standard	ASTM A276/A276M-2017 Standard Specification for Stainless Steel Bars and Shapes
Classification	Austenitic Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	7.5	-	-	17	4	-
Maximum Value	0.15	1	10	0.06	0.03	19	6	0.25

Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
all	Annealing - Hot or Cold Precision Rolling (A)	≥515	≥275	≥40	≥45
≤19.05	Relatively Strict Cold Working (B)	≥860	≥690	≥12	≥35
＞19.05~25.4	Relatively Strict Cold Working (B)	≥795	≥550	≥15	≥35
＞25.4~31.75	Relatively Strict Cold Working (B)	≥725	≥450	≥20	≥35
＞31.75~38.1	Relatively Strict Cold Working (B)	≥690	≥345	≥24	≥45
＞38.1~44.45	Relatively Strict Cold Working (B)	≥655	≥310	≥28	≥45

1 Approximate Comparison Table Austenitic Stainless Steel

2 Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S35450	SUS202	S20200	X12CrMnNiN18-9-5	4373-202-00-I	1.4373

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!