B150 C63020 C63020 - ASTM B 150/150M-2012(R2017) - H2ABC

中文版

Grade	B150 C63020
USA UNS	C63020
Corresponding Standard	ASTM B150/B150M-2012(R2017) Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
Classification	Copper and Copper Alloys

B150 C63020 Chemical Element Composition Content (%)

Component	Fe	Mn	Cr	Ni ^*	Cu ^**	Co	Pb	Al	Zn	Sn
Minimum Value	4	-	-	4.2	74.5	-	-	10	-	-
Maximum Value	5.5	1.5	0.05	6	-	0.2	0.03	11	0.3	0.25

B150 C63020 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Bar, rod; d≤25	Quenching hardening + tempering (TQ30)	≥930	≥690	≥6
Bar, rod; 25<d≤50	Quenching hardening + tempering (TQ30)	≥890	≥650	≥6
Bar; 50<d≤100	Quenching hardening + tempering (TQ30)	≥890	≥620	≥6

Approximate Comparison Table Bronze

China	Japan	United States		International Organization for Standardization		Russia	United Kingdom		Australia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	GOST	Commercial Grade	BS EN/BS	Australian Standard AS
QAl10-5-5	C6302 C63020	80Cu-10Al-5Fe-5Ni	C63020	CuAl10Fe5Ni5	C63020	БрАНЖМц10-5-5-1.5	CA104	C63020	630D C63020

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!