C3710 C3710 R C3710 P - JIS H 3100-2018

Grade	C3710
Other Names
Corresponding Standard	JIS H 3100-2018 Copper and copper alloy sheets, plates and strips
Classification	Copper and Copper Alloys
Properties	High Strength Impact Resistance Good Machinability

C3710 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	More
Minimum Value	-	58	0.6	Zn: Residual
Maximum Value	0.1	62	1.2	Zn: Residual

C3710 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip(R);0.3≤t≤2	C3710 R-1/4H	1/4 Hard (1/4H)	375~460	≥20	-
Sheet (P); 0.3≤t≤10	C3710 P-1/4H	1/4 Hard (1/4H)	375~460	≥20	-
Sheet (P); 0.3≤t≤10	C3710 P-1/2H	1/2 Hard (1/2H)	420~510	≥18	-
Strip(R);0.3≤t≤2	C3710 R-1/2H	1/2 Hard (1/2H)	420~510	≥18	-
Sheet (P); 0.3≤t≤10	C3710 P-H	Hard (H)	≥470	-	-
Strip(R);0.3≤t≤2	C3710 R-H	Hard (H)	≥470	-	-

1 Approximate Comparison Table Brass

China	Japan	United States		International Organization for Standardization		Russia	Australia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	GOST	Australian Standard AS
HPb60-1	C3710 C37100	60Cu-39Zn-1Pb	C37100	CuZn39Pb1	C37100	ЛС60-1	371C C37100

2 Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany	European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	EN	Numerical Grade	GOST	SS	BS EN/BS
C3710	C37000	CuZn39Pb1	CuZn38Pb1.5	CuZn38Pb1	CW607N	LS59-1	CuZn38Pb1	CZ129

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!