S32750 - ASTM A276/A276M-2017

USA UNS	S32750
Corresponding Standard	ASTM A276/A276M-2017 Standard Specification for Stainless Steel Bars and Shapes
Classification	Duplex Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	24	6	-	3	0.24
Maximum Value	0.03	0.8	1.2	0.035	0.02	26	8	0.5	5	0.32

Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
≤50.8	Annealing - Hot or Cold Precision Rolling (A)	≥800	≥550	≥15	≤310
＞50.8	Annealing - Hot or Cold Precision Rolling (A)	≥760	≥515	≥15	≤310

1 Approximate Comparison Table

China		Japan	United States		International Organization for Standardization		Germany		European Standard
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade
022Cr25Ni7Mo4N	S25073	UR 47N+	2507	S32750	X2CrNiMoN25-7-4	4410-327-50-E	X2CrNiMoN25-7-4	1.4410	X2CrNiMoN25-7-4	1.4410

2 Approximate Comparison Table

3 Approximate Comparison Table

4 Approximate Comparison Table

5 Approximate Comparison Table

China		United States		International Organization for Standardization		United Kingdom
GB	ISC	AISI	UNS	ISO	Numerical Grade	BS EN/BS
022Cr25Ni7Mo4N (GB/T 39033)	S25073	2507	S32750 (ASTM A595-16)	X2CrNiMoN25-7-4 (ISO 15510:2014)	4410-327-50-E	X2CrNiMoN25-7-4/1.4410 (BS EN 10088-3:2014)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!