1J50 - GB /T 32286.1-2015

Grade	1J50
Corresponding Standard	GB /T 32286.1-2015 Soft magnetic alloys-Part 1: Nickel-Iron alloys
Classification	Alloy Steel
Density	8.2 g/cm³

1J50 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Ni	Cu	More
Minimum Value	-	0.15	0.3	-	-	49	-	Fe:余量
Maximum Value	0.03	0.3	0.6	0.02	0.02	50.5	0.2	Fe:余量

1J50 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Hardening Treatment	785	685	3	170
Annealing	450	150	37	130

Approximate Comparison Table soft magnetic metal

China	Japan	United States	International Organization for Standardization	Germany	France	Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	GOST	BS EN/BS
1J50 (Ni50)	PB-2S	No2Hipernik	E32a	Hyperm50	AnhysterD	50Н	Radiometal

1J50 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!