S20100 - ASTM A473-2018

USA UNS	S20100
ASTM Specification or Grade	201
Corresponding Standard	ASTM A473-2018 stainless steel forgings
Classification	Austenitic Stainless Steel

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	5.5	-	-	16	3.5	-
Maximum Value	0.15	1	7.5	0.06	0.03	18	5.5	0.25

Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
≥515	≥205	≥40	≥50

1 Approximate Comparison Table

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization	European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	EN	Numerical Grade
12Cr17Mn6Ni5N (1Cr17Mn6Ni5N)	S35350	201	SUS 201	STS 201	201	S20100	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	1.4372 1.4618

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S35350	SUS201	S20100	X12CrMnNiN17-7-5	4372-201-00-I	1.4372

3 Approximate Comparison Table

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!