Grade Q355D
Corresponding Standard GB /T 1591-2018
High strength low alloy structural steels
Classification Alloy Steel
Properties Strength
Q355D Chemical Element Composition Content (%)
  Component C Si Mn P S Cr Ni Cu N
厚度t≤30 Minimum Value - - - - - - - - -
Maximum Value 0.2 0.55 1.6 0.025 0.025 0.3 0.3 0.4 0.012
  Component C Si Mn P S Cr Ni Cu N
厚度30<t≤100 Minimum Value - - - - - - - - -
Maximum Value 0.22 0.55 1.6 0.025 0.025 0.3 0.3 0.4 0.012
Q355D Mechanical Properties
condition Test Temperature Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Impact Energy Absorption
KV2
J
Long and Flat Products; t≤16; Longitudinal 470~630 ≥355 ≥22
Long and Flat Products; t≤16; Transverse 470~630 ≥355 ≥20
long material and flat material; 16 < t ≤ 40; longitudinal 470~630 ≥345 ≥22
Long and flat products; 16<t≤40; Transverse 470~630 ≥345 ≥20
long material and flat material; 40 < t ≤ 63; longitudinal 470~630 ≥335 ≥21
Long and flat products; 40<t≤63; Transverse 470~630 ≥335 ≥19
long material and flat material; 63 < t ≤ 80; longitudinal 470~630 ≥325 ≥20
Long and flat products; 63<t≤80; Transverse 470~630 ≥325 ≥18
long material and flat material; 80 < t ≤ 100; longitudinal 470~630 ≥315 ≥20
Long and flat products; 80<t≤100; Transverse 470~630 ≥315 ≥18
long material and flat material; 100 < t ≤ 150; longitudinal 450~600 ≥295 ≥18
Long and flat products; 100<t≤150; Transverse 450~600 ≥295 ≥18
long material and flat material; 150 < t ≤ 200; longitudinal 450~600 ≥285 ≥17
Long and flat products; 150<t≤200; Transverse 450~600 ≥285 ≥17
long material and flat material; 200 < t ≤ 250; longitudinal 450~600 ≥275 ≥17
Long and flat products; 200<t≤250; Transverse 450~600 ≥275 ≥17
Long Products and Flat Products; 250<t≤400; Longitudinal 450~600 ≥265 ≥17
Long Products and Flat Products; 250<t≤400; Transverse 450~600 ≥265 ≥17
Long products and flat products; longitudinal ≥34
Long products and flat products; transverse ≥27
Q355D Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!