E295 1.0050 - EN 10025-2-2019

Grade	E295
European Standard Steel Grade	1.0050
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Brand/Supplier	-> BAOSTEEL
Classification	Carbon Steel
Density	7.85 g/cm³

E295 Chemical Element Composition Content (%)

Component	P	S	N
Minimum Value	-	-	-
Maximum Value	0.045	0.045	0.012

• FN= rimming steels not permitted; FF = fully killed steel

E295 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Long and flat products; 1<t≤1.5	490~660	≥295	≥13
Long and flat products; 1.5<t≤2	490~660	≥295	≥14
Long and flat products; 2<t≤2.5	490~660	≥295	≥15
Long and flat products; 2.5<t<3	490~660	≥295	≥16
Long and flat products; 3≤t≤16	470~610	≥295	≥20
Long and flat products; 16<t≤40	470~610	≥285	≥20
Long and flat products; 40<t≤63	470~610	≥275	≥19
Long and flat products; 63<t≤80	470~610	≥265	≥18
Long and flat products; 80<t≤100	470~610	≥255	≥18
Long and flat products; 100<t≤150	450~610	≥245	≥16
Long and flat products; 150<t≤200	440~610	≥235	≥15
Long and flat products; 200<t≤250	440~610	≥225	≥15
Long products and flat products; t≤1	490~660	≥295	≥12

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

E295 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!