中文版
Home Material GB /T 3098.24-2020
简体 | 繁體
Performance Level 718
Other Names
Corresponding Standard GB /T 3098.24-2020
Mechanical Properties of Fasteners-stainless Steel and Nickel Alloys Bolts, Screws, Studs and Nuts for High Temperature Applications
Classification Nickel and Nickel Alloys
Properties Corrosion Resistance
718 Chemical Element Composition Content (%)
Component C ② Si Mn P S Cr Ni Cu Mo Ti Nb B Co Al More
Minimum Value - - - - - 17 50 - 2.8 0.65 4.75 - - 0.2 Fe:余量
Maximum Value 0.08 0.35 0.35 0.015 0.015 21 55 0.3 3.3 1.15 5.5 0.006 1 0.8
718 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Bolts, screws, studs; all sizes Solution Heat Treatment (+AT) + Precipitation Hardening (+P) ≥1230 ≥1030 ≥0.2d HRC
36~48
Nuts; all sizes Solution Heat Treatment (+AT) + Precipitation Hardening (+P) ≥1230 36~48
718 Corresponding Standards(Same grade name, different standards)
1 YJT
718 3Cr2MoNi
2 GB /T 3098.24-2020
718 NiCr19NbMo UNS N07718 合金 718
3 Q/BQB 135-2009
718

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!