EN-GJS-600-10 5.3110 EN-GJS-600-10C - EN 1563-2018

Grade	EN-GJS-600-10
European Standard Steel Grade	5.3110
Other Names
Corresponding Standard	EN 1563-2018
Classification	cast Iron
Density	7 g/cm³

EN-GJS-600-10 Chemical Element Composition Content (%)

Component	Si	Mn ^*	P
Minimum Value	-	-	-
Maximum Value	-	0.5	0.05
Nominal Value	4.3	-	-

EN-GJS-600-10 Mechanical Properties

condition	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting specimen; t≤30	EN-GJS-600-10	≥600	≥470	≥10
Casting specimen; 30<t≤60	EN-GJS-600-10	≥580	≥450	≥8
Casting sample; t＞60	EN-GJS-600-10	Agreed by Both Parties	Agreed by Both Parties	Agreed by Both Parties
Base specimen; t≤30	EN-GJS-600-10C	≥580	≥450	≥8	-
Base specimen; 30<t≤60	EN-GJS-600-10C	≥560	≥430	≥6
Body sample; 60<t≤200	EN-GJS-600-10C	Supplied by Vendor	Supplied by Vendor	Supplied by Vendor
Castings; t≤60					200~230
Castings; 60 < t ≤ 200					190~220

• Samples cut from the casting the letter “C” is added at the end of the designation by symbol. e.g. EN-GJS-800-2C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!