F468MC Cu 462 C46200 - ASTM F468M-2006(R2012)

Grade	F468MC Cu 462
USA UNS	C46200
Corresponding Standard	ASTM F468M-2006(R2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Classification	Copper and Copper Alloys

F468MC Cu 462 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Sn	More
Minimum Value	-	62	-	0.5	Zn:Balance
Maximum Value	0.1	65	0.2	1	Zn:Balance

F468MC Cu 462 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Full-Size	345~550	≥170		HRB 65~90
Machined Specimen	≥345	≥170	≥20	65~90

Note1: Where both tension and hardness tests are performed, the tension tests shall take precedence for acceptance purposes.
Note2: The yield and tensile streng1h values for full-size products shall be computed by dividing the yield and maximum tensile load by the stress area for the product diameter and thread pitch as given in table on tensile stress areas

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!