F468ME Cu 510 C51000 - ASTM F468M-2006(R2012)

Grade	F468ME Cu 510
USA UNS	C51000
Corresponding Standard	ASTM F468M-2006(R2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Classification	Copper and Copper Alloys

F468ME Cu 510 Chemical Element Composition Content (%)

Component	Fe	P	Pb	Zn	Sn	More
Minimum Value	-	0.03	-	-	4.2	Cu:Balance
Maximum Value	0.1	0.35	0.05	0.3	5.8	Cu:Balance

F468ME Cu 510 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Full-Size	410~620	≥240		HRB 60~95
Machined Specimen	≥380	≥205	≥15	60~95

Note1: Where both tension and hardness tests are performed, the tension tests shall take precedence for acceptance purposes.
Note2: The yield and tensile streng1h values for full-size products shall be computed by dividing the yield and maximum tensile load by the stress area for the product diameter and thread pitch as given in table on tensile stress areas

Approximate Comparison Table Bronze

China		United States		International Organization for Standardization		European Standard		Russia	United Kingdom
GB	ISC	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade	GOST	Commercial Grade	BS EN/BS
QSn5-0.2	C51000	95Cu-5Sn-.2P	C51000	CuSn5	C51000	CuSn5	CW451K	БрОФ5-0.25	PB102	C51000

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!