TiAl6V4 3.7165 - DIN 17862-2012

Grade	TiAl6V4
Germany W-Nr.	3.7165
Corresponding Standard	DIN 17862-2012 Titanium and titanium alloy bars – Technical specification
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance
Density	4.43 g/cm³

TiAl6V4 Chemical Element Composition Content (%)

Component	Fe	C	N	V	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	3.5	5.5	-	-	-	-	Ti:余量
Maximum Value	0.3	0.08	0.05	4.5	6.75	0.015	0.2	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TiAl6V4 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar; 6<d≤80	3.7165.1	Annealing	≥900	≥390	≥10	≥25	≈310	-
Bar; 80<d≤150	3.7165.1	Annealing	≥900	≥830	≥8	≥20	≈310	-
Bar; 6 < d ≤ 25	3.7165.7	Solid Solution Annealing + Artificial Aging	≥1070	≥1000	≥8	≥15	-	-

TiAl6V4 Corresponding Standards(Same grade name, different standards)

1	DIN 17862-2012
	TiAl6V4 3.7165
2	DIN 17851-1990
	TiAl6V4 3.7165
3	DIN 17860-2010
	TiAl6V4 3.7165
4	VDI 2230-1-2015
	TiAl6V4 3.7165.10

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!