F468MG Cu 614 C61400 - ASTM F468M-2006(R2012)

Grade	F468MG Cu 614
USA UNS	C61400
Corresponding Standard	ASTM F468M-2006(R2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Classification	Copper and Copper Alloys

F468MG Cu 614 Chemical Element Composition Content (%)

Component	Fe	Mn	Cu ^①	Al
Minimum Value	1.5	-	88	6
Maximum Value	3.5	1	-	8

F468MG Cu 614 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Full-Size	520~760	≥240		HRB 70~95
Machined Specimen	≥520	≥240	≥30	70~95

Note1: Where both tension and hardness tests are performed, the tension tests shall take precedence for acceptance purposes.
Note2: The yield and tensile streng1h values for full-size products shall be computed by dividing the yield and maximum tensile load by the stress area for the product diameter and thread pitch as given in table on tensile stress areas

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!