F468MV Ni 405 N04405 - ASTM F468M-2006(R2012)

Grade	F468MV Ni 405
USA UNS	N04405
Corresponding Standard	ASTM F468M-2006(R2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Classification	Nickel and Nickel Alloys

F468MV Ni 405 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Ni	More
Minimum Value	-	-	-	-	0.025	63	Cu:Balance
Maximum Value	2.5	0.3	0.5	2	0.06	70	Cu:Balance

F468MV Ni 405 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Full-Size	480~860	≥205		60HRB~20HRC
Machined Specimen	≥480	≥205	≥20	60HRB~20HRC

Note1: Where both tension and hardness tests are performed, the tension tests shall take precedence for acceptance purposes.
Note2: The yield and tensile streng1h values for full-size products shall be computed by dividing the yield and maximum tensile load by the stress area for the product diameter and thread pitch as given in table on tensile stress areas

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!