F468MX Al 2024-T4 A92024 - ASTM F468M-2006(R2012)

Grade	F468MX Al 2024-T4
USA UNS	A92024
Corresponding Standard	ASTM F468M-2006(R2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
Classification	Aluminum and Aluminum Alloys

F468MX Al 2024-T4 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.3	-	3.8	-	-	1.2	-	-	Al:Balance； Ti+Zr≤0.2
Maximum Value	0.5	0.5	0.9	0.1	4.9	0.15	0.25	1.8	0.05	0.15	Al:Balance； Ti+Zr≤0.2

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

F468MX Al 2024-T4 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Full-Size	380~480	≥250		HRB 70~85
Machined Specimen	≥430	≥275	≥10	70~85

Note1: Where both tension and hardness tests are performed, the tension tests shall take precedence for acceptance purposes.
Note2: The yield and tensile streng1h values for full-size products shall be computed by dividing the yield and maximum tensile load by the stress area for the product diameter and thread pitch as given in table on tensile stress areas

1 Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		Germany		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN
2024	2024 A92024	2024	A92024	AlCu4Mg1	A92024	AlCu4Mg2	3.1355 A92024	EN-AW-AlCu4Mg1

2 Approximate Comparison Table Wrought aluminum and aluminum alloy

China	Japan	United States		International Organization for Standardization		France	European Standard	Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	GOST
2024(A)	2024(A) A92024	2024(A)	A92024	AlCu4Mg1(A)	A92024	A-UG1 2024(A) A92024	EN-AW-AlCu4Mg1	Д16Ч 1160

3 Approximate Comparison Table Wrought aluminum and aluminum alloy

China		United States		International Organization for Standardization		Germany		European Standard	Russia
GB	ISC	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	GOST
2A12 (LY12)	2024	2024	A92024	AlCu4Mg1	A92024	AlCu4Mg2	3.1355 A92024	EN-AW-AlCu4Mg1	Д16/160

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!