AlZnMgCu 1.5 3.4365 - DIN 1725-1-1983

Grade	AlZnMgCu 1.5
Commercial Grade
Germany W-Nr.	3.4365
Corresponding Standard	DIN 1725-1-1983 Aluminium alloy ; wrought alloys
Classification	Aluminum and Aluminum Alloys
Density	2.8 g/cm³

AlZnMgCu 1.5 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	-	0.18	1.2	-	5.1	2.1	-	-	Al:余量；Ti+Zr≤0.25
Maximum Value	0.5	0.4	0.3	0.28	2	0.2	6.1	2.9	0.05	0.15	Al:余量；Ti+Zr≤0.25

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Approximate Comparison Table Wrought aluminum and aluminum alloy

China	United States		International Organization for Standardization		Germany		European Standard	Australia
ISC	ASTM	UNS	ISO	Numerical Grade	W-Nr.	L-Nr.	EN	Australian Standard AS
7075	7075	A97075	AlZn5.5MgCu	A97075	AlZnMgCu1.5	3.4365 A97075	EN-AW-AlZn5.5MgCu	7075 A97075

AlZnMgCu1.5 Corresponding Standards(Same grade name, different standards)

1	VDI 2230-1-2015
	AlZnMgCu 1.5 3.4365.71
2	DIN 1725-1-1983
	AlZnMgCu 1.5 3.4365 7075

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!