B211 1100 - ASTM B211/B211M-2019

Grade	B211 1100
Corresponding Standard	ASTM B211/B211M-2019 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
Classification	Aluminum and Aluminum Alloys

B211 1100 Chemical Element Composition Content (%)

Component	Mn	Cu	Al ^①	Zn	Other Individual	Other Total	More
Minimum Value	-	0.05	99	-	-	-	Si+Fe≤0.95
Maximum Value	0.05	0.2	-	0.1	0.05	0.15	Si+Fe≤0.95

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

B211 1100 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
d≤3.2	Annealing (O)	75~105
d＞3.2	Annealing (O)	75~105	≥20	（in 50mm） ≥25
d≤10	Strain-Hardening - 1/4 Hard (H12)	≥95
d≤10	Strain-Hardening - 1/2 Hard (H14)	≥110
d≤10	Strain-Hardening-3/4 Hard (H16)	≥130
d≤10	Strain - Hardening - 4/4 Hard (H18)	≥150
all	Strain-hardened (H112)	≥75	≥20

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!