Nimonic 90 - SAE J467b-1956(R1968)

Commercial Grade
Other Names
Corresponding Standard	SAE J467b-1956(R1968) Special Purpose Alloys (Superalloys)
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.193 g/cm³

Chemical Element Composition Content (%)

	Component	Fe	C	Si	Mn	Cr	Cu	Ti	Co	Al	More
标准	Minimum Value	-	-	-	-	-	-	-	-	-	Ni:余量
	Maximum Value	-	-	-	-	-	-	-	-	-
	Nominal Value	2.5	0.07	0.75	0.5	19.5	0.05	2.4	18	1.4

	Component	Fe	C	Si	Mn	S	Cr	Cu	Ti	Zr	B	Co	Pb	Al	More
SMC	Minimum Value	-	-	-	-	-	18	-	2	-	-	15	-	1	Ni:余量
	Maximum Value	1.5	0.13	1	1	0.015	21	0.2	3	0.15	0.02	21	0.002	2
	Nominal Value	-	-	-	-	-	-	-	-	-	-	-	-	-

Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
1234	807	33

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!