N5 NW2201 N02201 - GB /T 21653-2008

Grade	N5
Other Names
Corresponding Standard	GB /T 21653-2008 Nickel and nickel-alloy wire and drawing stock
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance

N5 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cr	Cu	More
Minimum Value	-	-	-	-	-	-	-	Ni+Co≥99.0
Maximum Value	0.4	0.02	0.3	0.35	0.01	0.2	0.25	Ni+Co≥99.0

The chemical composition conforms to GB/T 5235

N5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Wire, Wire Rod; 0.03≤t<0.45	M (Soft)	≥340	≥20
Wire, Wire Rod; 0.45≤t<10	M (Soft)	≥340	≥25

t= diameter or distance between parallel sides，unit mm

Approximate Comparison Table Corrosion-Resistant Alloy

N5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!