SAPH 310 - JIS G 3113-2018

Grade	SAPH 310
Corresponding Standard	JIS G 3113-2018 Hot-rolled steel plates, sheet and strip for automobile structural uses
Brand/Supplier	-> BENSTEEL
Classification	Other metal materials

SAPH 310 Chemical Element Composition Content (%)

Component	P	S
Minimum Value	-	-
Maximum Value	0.04	0.04

SAPH 310 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Thick plate, Thin plate, Coil; 1.6≤t<2	Hot Rolling	≥310	≥185	≥33
Thick plate, Thin plate, Coil; 2≤t<2.5	Hot Rolling	≥310	≥185	≥34
Thick plate, Thin plate, Coil; 2.5≤t<3.15	Hot Rolling	≥310	≥185	≥36
Thick plate, Thin plate, Coil; 3.15≤t<4	Hot Rolling	≥310	≥185	≥38
Thick plate, Thin plate, Coil; 4≤t<6.3	Hot Rolling	≥310	≥185	≥40
Thick plate, Thin plate, Coil; 6.3≤t<14	Hot Rolling	≥310	① ≥175	≥41

New and Old Grade Replacement List

SAPH310 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!