TAB 4220 H(C) Class 80 Ti-4Al-22V - JIS H 4650-2016

Grade	TAB 4220 H(C)
Other Names
Corresponding Standard	JIS H 4650-2016 Titanium and Titanium Alloys - Rods and Bars
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance

TAB 4220 H(C) Chemical Element Composition Content (%)

Component	Fe	C	N	V	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	20	3.5	-	-	-	-	Ti:Remainder
Maximum Value	1	0.1	0.05	23	4.5	0.015	0.25	0.1	0.4	Ti:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TAB 4220 H(C) Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Hot Rolled, Cold Rolled Bars; 8≤d≤25	640~900	≤850	≥10	≥55
Hot Rolled, Cold Rolled Bars; 25≤d<100	640~900	≤800	≥7	≥45
Hot rolled, cold rolled rods; 1≤d<8	640~900		≥6

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!