N07718 Inconel 718 - SAE J467b-1956(R1968)

Commercial Grade
USA UNS	N07718
Other Names
Corresponding Standard	SAE J467b-1956(R1968) Special Purpose Alloys (Superalloys)
Brand/Supplier	America ->
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance Good Weldability
Density	8.19 g/cm³

Chemical Element Composition Content (%)

	Component	Fe	C	Si	Mn	Cr	Mo	Ti	Nb	Al	More
Standard	Minimum Value	-	-	-	-	-	-	-	-	-	Ni:Remainder
	Maximum Value	-	-	-	-	-	-	-	-	-
	Nominal Value	18.5	0.04	0.2	0.2	18.6	3.1	0.9	5	0.4

	Component	C	Si	Mn	P	S	Cr	Ni ^①	Cu	Mo	Ti	Nb ^②	B	Co	Al	More
SMC	Minimum Value	-	-	-	-	-	17	50	-	2.8	0.65	4.75	-	-	0.2	Fe:Remainder
	Maximum Value	0.08	0.35	0.35	0.015	0.015	21	55	0.3	3.3	1.15	5.5	0.006	1	0.8
	Nominal Value	-	-	-	-	-	-	-	-	-	-	-	-	-	-

① Include Co
② Include Ta
Chemical composition of SMC-Special metals corporation
Density of annealed material 8.19 g/cm<sup>3</sup>; Density of annealed and aged material 8.22 g/cm<sup>3</sup>

Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %
1800,1325,1150°F	≥208	≥172	≥21

1 Approximate Comparison Table Deformed High-Temperature Alloy

China		United States				Germany		France	United Kingdom
GB	ISC	Commercial Grade	UNS	SAE	AMS	DIN EN/DIN	W-Nr.	NF EN/NF	Commercial Grade
GH4169 (GH169)	H41690	Inconel 718	N07718	XEV-1	5596 5662	NiCr19NbMo NiCr19Fe19Nb5Mo3	2.4668	ATG C1 NC19FeNb	Inconel 718

2 Approximate Comparison Table Corrosion-Resistant Alloy

China		United States	Germany
GB	ISC	UNS	W-Nr.
NS 4301 GH 4169	H 07718	N 07718	2.4668

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!