Grade C17E2C
European Standard Steel Grade 1.1147
Corresponding Standard EN 10263-3-2017
Steel rod, bars and wire for cold heading and cold extrusion Part 3: Technical delivery conditions for steels for case hardening steels
Classification Carbon Steel
C17E2C Chemical Element Composition Content (%)
Component C Si Mn P S Cu
Minimum Value 0.15 - 0.6 - - -
Maximum Value 0.19 0.3 0.9 0.025 0.025 0.25
C17E2C Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa
Reduction of Area
ψ
%
Bars, rods, wires; 5<d≤100 Unprocessed or Descaled (+U or +PE) ≤530 ≥58
Bars, rods, wires; 5<d≤100 Spheroidizing or Spheroidizing and Peeling (+AC or +AC+PE) ≤450 ≥65
Bars, wire; 5<d≤10 Untreated and Cold Drawn (+U+C) ≤630 ≥56
Bars, wire; 10<d≤40 Untreated and Cold Drawn (+U+C) ≤620 ≥56
Bar, wire; 2<d≤5 Untreated, Cold Drawn, and Spheroidized (+U+C+AC) ≤440 ≥67
Bar, wire; 5<d≤40 Untreated, Cold Drawn, and Spheroidized (+U+C+AC) ≤430 ≥67
Bar, wire; 2<d≤5 Untreated, Cold Drawn, Spheroidizing Treatment, and Tempered Rolling (+U+C+AC+LC) ≤480 ≥65
Bar, wire; 5<d≤40 Untreated, Cold Drawn, Spheroidizing Treatment, and Tempered Rolling (+U+C+AC+LC) ≤470 ≥65
Bars, wire; 5<d≤10 Spheroidizing Treatment and Cold Drawing (+AC+C) ≤550 ≥62
Bars, wire; 10<d≤40 Spheroidizing Treatment and Cold Drawing (+AC+C) ≤540 ≥62
1 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany European Standard
GB ISC JIS ASTM ISO DIN EN/DIN W-Nr. EN Numerical Grade
ML18Mn U41188 SWRCH18A 1018 CE16E4 C17E2C 1.1147 C17E2C 1.1147
2 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany European Standard
GB ISC JIS ASTM ISO DIN EN/DIN W-Nr. EN Numerical Grade
ML20Mn U41208 SWRCH22A 1022 CE20E4 C17E2C 1.1147 C17E2C 1.1147
3 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion
International Organization for Standardization European Standard
ISO EN Numerical Grade
C17E2C C17E2C 1.1147
C17E2C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!