C20E2C 1.1152 - EN 10263-3-2017

Grade	C20E2C
European Standard Steel Grade	1.1152
Corresponding Standard	EN 10263-3-2017 Steel rod, bars and wire for cold heading and cold extrusion Part 3: Technical delivery conditions for steels for case hardening steels
Classification	Carbon Steel

C20E2C Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cu
Minimum Value	0.18	-	0.3	-	-	-
Maximum Value	0.22	0.3	0.6	0.025	0.025	0.25

C20E2C Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
Bars, rods, wires; 5<d≤100	Unprocessed or Descaled (+U or +PE)	≤530	≥58
Bars, rods, wires; 5<d≤100	Spheroidizing or Spheroidizing and Peeling (+AC or +AC+PE)	≤470	≥65
Bars, wire; 5<d≤10	Untreated and Cold Drawn (+U+C)	≤640	≥56
Bars, wire; 10<d≤40	Untreated and Cold Drawn (+U+C)	≤630	≥56
Bar, wire; 2<d≤5	Untreated, Cold Drawn, and Spheroidized (+U+C+AC)	≤460	≥67
Bar, wire; 5<d≤40	Untreated, Cold Drawn, and Spheroidized (+U+C+AC)	≤450	≥67
Bar, wire; 2<d≤5	Untreated, Cold Drawn, Spheroidizing Treatment, and Tempered Rolling (+U+C+AC+LC)	≤500	≥65
Bar, wire; 5<d≤40	Untreated, Cold Drawn, Spheroidizing Treatment, and Tempered Rolling (+U+C+AC+LC)	≤490	≥65
Bars, wire; 5<d≤10	Spheroidizing Treatment and Cold Drawing (+AC+C)	≤580	≥62
Bars, wire; 10<d≤40	Spheroidizing Treatment and Cold Drawing (+AC+C)	≤570	≥62

Approximate Comparison Table

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
C20E2C	C20E2C	1.1152

C20E2C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!