S275JR 1.0044 - DIN EN 10025-2-2019

Grade	S275JR
Germany W-Nr.	1.0044
Corresponding Standard	DIN EN 10025-2-2019 Hot Rolled Products of Structural Steels - Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels
Classification	Carbon Steel
Density	7.85 g/cm³

S275JR Chemical Element Composition Content (%)

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t≤40	Minimum Value	-	-	-	-	-	-	-	-	-
t≤40	Maximum Value	0.21	1.5	0.035	0.035	0.29	0.42	0.55	0.11	0.012

	Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
t>40	Minimum Value	-	-	-	-	-	-	-	-	-
t>40	Maximum Value	0.22	1.5	0.035	0.035	0.29	0.42	0.55	0.11	0.012

S275JR Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	430~580	≥275	≥15	20°C ≥27
Long and flat products; 1<t≤1.5	430~580	≥275	≥16	≥27
Long and flat products; 1.5<t≤2	430~580	≥275	≥17	≥27
Long and flat products; 2<t≤2.5	430~580	≥275	≥18	≥27
Long and flat products; 2.5<t<3	430~580	≥275	≥19	≥27
Long and flat products; 3≤t≤16	410~560	≥275	≥23	≥27
Long and flat products; 16<t≤40	410~560	≥265	≥23	≥27
Long and flat products; 40<t≤63	410~560	≥255	≥22	≥27
Long and flat products; 63<t≤80	410~560	≥245	≥21	≥27
Long and flat products; 80<t≤100	410~560	≥235	≥21	≥27
Long and flat products; 100<t≤150	400~540	≥225	≥19	≥27
Long and flat products; 150<t≤200	380~540	≥215	≥18	≥27
Long and flat products; 200<t≤250	380~540	≥205	≥18	≥27
Long products and flat products; 250<t≤400	330~540	≥195	≥18	≥27

New and Old Grade Replacement List

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

S275JR Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!