S235J0 1.0114 - EN 10025-2-2019

Grade	S235J0
European Standard Steel Grade	1.0114
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Brand/Supplier	-> BENSTEEL -> BAOSTEEL
Classification	Carbon Steel
Density	7.85 g/cm³

S235J0 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	-	-	-	-
Maximum Value	0.17	1.4	0.03	0.03	0.29	0.42	0.55	0.11	0.012

• FN= rimming steels not permitted; FF = fully killed steel

S235J0 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	360~510	≥235	≥17	0°C ≥27
Long and flat products; 1<t≤1.5	360~510	≥235	≥18	≥27
Long and flat products; 1.5<t≤2	360~510	≥235	≥19	≥27
Long and flat products; 2<t≤2.5	360~510	≥235	≥20	≥27
Long and flat products; 2.5<t<3	360~510	≥235	≥21	≥27
Long and flat products; 3≤t≤16	360~510	≥235	≥26	≥27
Long and flat products; 16<t≤40	360~510	≥225	≥26	≥27
Long and flat products; 40<t≤63	360~510	≥215	≥25	≥27
Long and flat products; 63<t≤80	360~510	≥215	≥24	≥27
Long and flat products; 80<t≤100	360~510	≥215	≥24	≥27
Long and flat products; 100<t≤150	350~500	≥195	≥22	≥27
Long and flat products; 150<t≤200	340~490	≥185	≥21	≥27
Long and flat products; 200<t≤250	340~490	≥175	≥21	≥27
Long products and flat products; 250<t≤400	330~480	≥165	≥21	≥27

1 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q235C	SM400B	A284C A284D	E235C	St37-3U	E24-3	S235J0 Fe360C	1.0114	St3ps St3sp	1312	40C

2 Approximate Comparison Table

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q235C (GB/T 700-2006)	U12358	SM400A (JIS G3106:2004)	Gr.65[240] (ASTM A573/A573M:2000)	E235C (ISO 630:1995)	S235J0 (EN 10025-2:2004)	1.0114

S235J0 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!