S355J0 1.0553 - EN 10025-2-2019

Grade	S355J0
European Standard Steel Grade	1.0553
Corresponding Standard	EN 10025-2-2019 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Brand/Supplier	-> BENSTEEL -> BAOSTEEL
Classification	Carbon Steel
Density	7.85 g/cm³

S355J0 Chemical Element Composition Content (%)

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
d≤30	Minimum Value	-	-	-	-	-	-	-	-	-	-
d≤30	Maximum Value	0.2	0.55	1.6	0.03	0.03	0.29	0.42	0.55	0.11	0.012

	Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
d>30	Minimum Value	-	-	-	-	-	-	-	-	-	-
d>30	Maximum Value	0.22	0.55	1.6	0.03	0.03	0.29	0.42	0.55	0.11	0.012

• FN= rimming steels not permitted; FF = fully killed steel

S355J0 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Long products and flat products; t≤1	510~680	≥355	≥14	0°C ≥27
Long and flat products; 1<t≤1.5	510~680	≥355	≥15	≥27
Long and flat products; 1.5<t≤2	510~680	≥355	≥16	≥27
Long and flat products; 2<t≤2.5	510~680	≥355	≥17	≥27
Long and flat products; 2.5<t<3	510~680	≥355	≥18	≥27
Long and flat products; 3≤t≤16	470~630	≥355	≥22	≥27
Long and flat products; 16<t≤40	470~630	≥345	≥22	≥27
Long and flat products; 40<t≤63	470~630	≥335	≥21	≥27
Long and flat products; 63<t≤80	470~630	≥325	≥20	≥27
Long and flat products; 80<t≤100	470~630	≥315	≥20	≥27
Long and flat products; 100<t≤150	450~600	≥295	≥18	≥27
Long and flat products; 150<t≤200	450~600	≥285	≥17	≥27
Long and flat products; 200<t≤250	450~600	≥275	≥17	≥27
Long products and flat products; 250<t≤400	450~600	≥265	≥17	≥27

Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
16Mn	SS490B	A441 A633	E355C Fe510C	St52-3U	E36-3	S355J0 Fe510C①	1.0553	2132-01 2134-01	50C

S355J0 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!