X6CrNi18-10 - ISO 9328-7-2018

Grade	X6CrNi18-10
Corresponding Standard	ISO 9328-7-2018 Steel Flat Products for Pressure Purposes - Technical Delivery Conditions - Stainless Steels
Classification	Austenitic Stainless Steel

X6CrNi18-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.04	-	-	-	-	17	8	-
Maximum Value	0.08	1	2	0.035	0.015	19	11	0.1

X6CrNi18-10 Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤8, Cold Rolled Steel Strips	530~740	≥230	≥45	≥100
t≤13.5, Hot Rolled Steel Strips	510~710	≥210	≥45	≥100
t≤75, Hot rolled steel plates	510~710	≥190	≥45	≥100

Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States		International Organization for Standardization	Germany		European Standard
GB	ISC	JIS	AISI	UNS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
07Cr19Ni10	S30409	SUS 304H	304H	S30409	X6CrNi 18-10 X7CrNi 18-9	X6CrNi18-10	1.4948	X6CrNi18-10	1.4948

X6CrNi18-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!