X5CrNiN 19-9 1.4315 - EN 10088-3-2014

Grade	X5CrNiN 19-9
European Standard Steel Grade	1.4315
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X5CrNiN 19-9 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	-	-	-	18	8	0.12
Maximum Value	0.06	1	2	0.045	0.015	20	11	0.22

X5CrNiN 19-9 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bars, rods, wire rods, profiles, bright products; d≤40	+AT	550~750	≥270	(long.) ≥40	≤215	(long.) ≥100

Approximate Comparison Table

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization		European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade
06Cr19Ni10N (0Cr19Ni9N)	S30458	304N1	SUS 304N1 SUS 304N2	STS 304N1	304N	S30451	X5CrNiN 19-9	4315-304-51-I	X5CrNiN 19-9	1.4315

X5CrNiN19-9 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!