X5CrNiN 19-9 1.4315 - EN 10088-1-2005

Grade	X5CrNiN 19-9
European Standard Steel Grade	1.4315
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X5CrNiN 19-9 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	-	-	-	18	8	0.12
Maximum Value	0.06	1	2	0.045	0.015	20	11	0.22

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization		European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade
06Cr19Ni10N (0Cr19Ni9N)	S30458	304N1	SUS 304N1 SUS 304N2	STS 304N1	304N	S30451	X5CrNiN 19-9	4315-304-51-I	X5CrNiN 19-9	1.4315

X5CrNiN19-9 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X5CrNiN 19-9 1.4315
2	EN 10088-3-2014
	X5CrNiN 19-9 1.4315
3	ISO 15510-2014
	X5CrNiN19-9 4315-304-51-I
4	ISO 9328-7-2018
	X5CrNiN19-9
5	DIN EN 10088-3-2014
	X5CrNiN 19-9 1.4315
6	NF EN 10088-2-2005
	X5CrNiN19-9 1.4315
7	NF EN 10088-1-2005
	X5CrNiN19-9 1.4315
8	NF EN 10028-7-2008
	X5CrNiN19-9 1.4315
9	NF EN 10028-7-2000
	X5CrNiN19-9 1.4315

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!