X1CrNiSi 18-15-4 1.4361 - EN 10088-3-2014

Grade	X1CrNiSi 18-15-4
European Standard Steel Grade	1.4361
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X1CrNiSi 18-15-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	3.7	-	-	-	16.5	14	-	-
Maximum Value	0.015	4.5	2	0.025	0.01	18.5	16	0.2	0.1

X1CrNiSi 18-15-4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	530~730	≥210	(long.) ≥40	≤230	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	530~730	≥210	(tr.) ≥30	≤230	(tr.) ≥60

Approximate Comparison Table Austenitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X1CrNiSi18-15-4	4361-306-00-E	1.4361

X1CrNiSi18-15-4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!