X1CrNiSi 18-15-4 1.4361 - EN 10088-1-2005

Grade	X1CrNiSi 18-15-4
European Standard Steel Grade	1.4361
Corresponding Standard	EN 10088-1-2005 Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X1CrNiSi 18-15-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	3.7	-	-	-	16.5	14	-	-
Maximum Value	0.015	4.5	2	0.025	0.01	18.5	16	0.2	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X1CrNiSi18-15-4	4361-306-00-E	1.4361

X1CrNiSi18-15-4 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiSi 18-15-4 1.4361
2	EN 10088-3-2014
	X1CrNiSi 18-15-4 1.4361
3	ISO 15510-2014
	X1CrNiSi18-15-4 4361-306-00-E
4	ISO 9328-7-2018
	X1CrNiSi18-15-4
5	DIN EN 10088-3-2014
	X1CrNiSi 18-15-4 1.4361
6	NF EN 10088-2-2005
	X1CrNiSi18-15-4 1.4361
7	NF EN 10088-1-2005
	X1CrNiSi18-15-4 1.4361
8	EN 10272-2016
	X1CrNiSi18-15-4 1.4361

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!