X12CrMnNiN 17-7-5 1.4372 - EN 10088-3-2014

Grade	X12CrMnNiN 17-7-5
European Standard Steel Grade	1.4372
Corresponding Standard	EN 10088-3-2014 Stainless Steels-Part 3: Technical Delivery Conditions for Semi-Finished Products, Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X12CrMnNiN 17-7-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	5.5	-	-	16	3.5	0.05
Maximum Value	0.15	1	7.5	0.045	0.015	18	5.5	0.25

X12CrMnNiN 17-7-5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	680~880	≥230	(long.) ≥40	≤260	(long.) ≥100
Bar, rod, wire, section, bright products; 160<d≤250	+AT	680~880	≥230	(tr.) ≥35	≤260	(tr.) ≥60

Approximate Comparison Table Austenitic Stainless Steel

X12CrMnNiN17-7-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!