X12CrMnNiN 17-7-5 1.4372 - EN 10088-1-2005

Grade	X12CrMnNiN 17-7-5
European Standard Steel Grade	1.4372
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X12CrMnNiN 17-7-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	5.5	-	-	16	3.5	0.05
Maximum Value	0.15	1	7.5	0.045	0.015	18	5.5	0.25

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization	European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	EN	Numerical Grade
12Cr17Mn6Ni5N (1Cr17Mn6Ni5N)	S35350	201	SUS 201	STS 201	201	S20100	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	X12CrMnNi 17-7-5 X9CrMnNiCu17-8-5-2	1.4372 1.4618

2 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization		European Standard
ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
S35350	SUS201	S20100	X12CrMnNiN17-7-5	4372-201-00-I	1.4372

3 Approximate Comparison Table

Japan	United States	France	European Standard
JIS	ASTM	NF EN/NF	EN	Numerical Grade
SUS201	201	Z12CMN17-07Az	X12CrMnNiN17-7-5	1.4372

X12CrMnNiN17-7-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X12CrMnNiN 17-7-5 1.4372
2	ISO TS 15510-2003
	X12CrMnNiN17-7-5
3	EN 10088-3-2014
	X12CrMnNiN 17-7-5 1.4372
4	ISO 15510-2014
	X12CrMnNiN17-7-5 4372-201-00-I
5	DIN EN 10088-3-2014
	X12CrMnNiN 17-7-5 1.4372
6	NF EN 10088-2-2005
	X12CrMnNiN17-7-5 1.4372
7	NF EN 10088-1-2005
	X12CrMnNiN17-7-5 1.4372
8	DIN EN 10151-2002
	X12CrMnNiN17-7-5 1.4372

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!