X1CrNiMoCuN 24-22-8 1.4652 - EN 10088-3-2014

Grade	X1CrNiMoCuN 24-22-8
European Standard Steel Grade	1.4652
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X1CrNiMoCuN 24-22-8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	2	-	-	23	21	0.3	7	0.45
Maximum Value	0.02	0.5	4	0.03	0.005	25	23	0.6	8	0.55

X1CrNiMoCuN 24-22-8 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤50	+AT	750~1000	≥430	(long.) ≥40	≤310	(long.) ≥100

Approximate Comparison Table Austenitic Stainless Steel

China		United States		International Organization for Standardization		Germany		European Standard
GB	ISC	Commercial Grade	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade
015Cr24Ni22Mo8Mn3CuN 654SMo	S32652	654SMO	S32654	X1CrNiMoCuN24-22-8	4652-326-54-I	X1CrNiMoCuN24-22-8	1.4652	X1CrNiMoCuN24-22-8	1.4652

X1CrNiMoCuN24-22-8 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!