X1CrNiMoCuN 24-22-8 1.4652 - EN 10088-1-2005

Grade	X1CrNiMoCuN 24-22-8
European Standard Steel Grade	1.4652
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X1CrNiMoCuN 24-22-8 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	2	-	-	23	21	0.3	7	0.45
Maximum Value	0.02	0.5	4	0.03	0.005	25	23	0.6	8	0.55

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

China		United States		International Organization for Standardization		Germany		European Standard
GB	ISC	Commercial Grade	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade
015Cr24Ni22Mo8Mn3CuN 654SMo	S32652	654SMO	S32654	X1CrNiMoCuN24-22-8	4652-326-54-I	X1CrNiMoCuN24-22-8	1.4652	X1CrNiMoCuN24-22-8	1.4652

X1CrNiMoCuN24-22-8 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiMoCuN 24-22-8 1.4652
2	ISO TS 15510-2003
	X1CrNiMoCuN24-22-8
3	EN 10088-3-2014
	X1CrNiMoCuN 24-22-8 1.4652
4	ISO 15510-2014
	X1CrNiMoCuN24-22-8 4652-326-54-I
5	DIN EN 10088-3-2014
	X1CrNiMoCuN 24-22-8 1.4652
6	NF EN 10088-2-2005
	X1CrNiMoCuN24-22-8 1.4652
7	NF EN 10088-1-2005
	X1CrNiMoCuN24-22-8 1.4652

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!