中文版
Home Material ISO 683-18-2014
简体 | 繁體
Grade X12Cr13
ISO Numeric Designation 4006-410-00-I
Corresponding Standard ISO 683-18-2014
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 18: Bright Steel Products
Classification Martensitic Stainless Steel
X12Cr13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni
Minimum Value 0.08 - - - - 11.5 -
Maximum Value 0.15 1 1.5 0.04 0.03 13.5 0.75
X12Cr13 Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW 		Impact Energy Absorption
KV2
J
t≤16 Annealing ≤880 ≤261
16＜t≤40 Annealing ≤800 ≤234
40＜t≤63 Annealing ≤760 ≤222
63＜t≤160 Annealing ≤730 ≤213
t≤10 Quenching + Tempering (+QT650) 700~1000 ≥550 ≥9
10＜t≤16 Quenching + Tempering (+QT650) 700~1000 ≥500 ≥9
16＜t≤40 Quenching + Tempering (+QT650) 650~930 ≥450 ≥10 ≥25
40＜t≤63 Quenching + Tempering (+QT650) 650~880 ≥450 ≥10 ≥25
63＜t≤160 Quenching + Tempering (+QT650) 650~850 ≥450 ≥15 ≥25
1 Approximate Comparison Table Martensitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13 4006-410-00-I X10Cr 13
X12Cr 13 		1.4006
1.4006 		Z12C 13
Z10C13 		X12Cr 13 1.4006 12Х13
12KH13
15KH13L 		2302 410S21
2 Approximate Comparison Table Martensitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13
3
(ISO 683-13-1986) 		X10Cr 13 1.4006 Z12C 13 X12Cr 13 1.4006 12Х13 2302 410S21
3 Approximate Comparison Table Stainless Steels for Cold Heading and Cold Extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
12Cr13
(1Cr13) 		S41010 SUS410 410 S41000 X12Cr13 4006-410-00-I X12Cr13 1.4006
X12Cr13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X12Cr 13 1.4006
2 EN 10263-5-2001
X12Cr13 1.4006
3 EN 10250-4-1999
X12Cr 13 1.4006
4 ISO TS 15510-2003
X12Cr13
5 EN 10088-3-2005
X12Cr 13 1.4006
6 EN 10297-2-2005
X12Cr13 1.4006
7 EN 10088-3-2014
X12Cr 13 1.4006
8 ISO 15510-2014
X12Cr13 4006-410-00-I
9 DIN EN 10263-5-2018
X12Cr13 1.4006
10 DIN EN 10088-3-2014
X12Cr 13 1.4006
11 ISO 683-18-2014
X12Cr13 4006-410-00-I
12 ISO 4954-2018
X12Cr13 4006-410-00-I
13 NF EN 10088-2-2005
X12Cr13 1.4006
14 NF EN 10088-1-2005
X12Cr13 1.4006
15 DIN EN ISO 7153-1-2017
X12Cr 13 1.4006
16 EN 10263-5-2017
X12Cr13 1.4006
17 ISO 4954-2-2024
X12Cr13 4006-410-00-I
18 EN 10272-2016
X12Cr13 1.4006
19 DIN EN 10263-5-2002
X12Cr13 1.4006

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!