中文版
Home Material ISO 4955-2016
简体 | 繁體
Grade X3CrTi17
ISO Numeric Designation 4510-430-35-I
Corresponding Standard ISO 4955-2016
Heat-Resistant Steels
Classification Alloy Steel
Properties Corrosion Resistance
X3CrTi17 Chemical Element Composition Content (%)
Component C Si Mn P S Cr More
Minimum Value - - - - - 16 Ti: [4×(C+N)+0.15] ~ 0.80 *
Maximum Value 0.05 1 1 0.04 0.015 18
X3CrTi17 Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
flat products,0.5≤t≤12 Annealing (+A) 420~600 ≥230 ≥23
Profiles, hexagons; 5≤d≤25 Annealing (+A) 420~600 ≥230
Bars and Profiles, 1.5≤d≤25 Annealing (+A) 420~600 ≥230
Forgings, 5≤d≤15 Annealing (+A) 420~600 ≥230
Approximate Comparison Table Ferritic Stainless Steel
China Japan United States International Organization for Standardization Germany France European Standard
ISC JIS ASTM ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade
S11863 SUS 430LX S43035 X3CrTi 17 4510-430-35-I X6CrTi 17
(X8CrTi 17) 		1.4510 Z8CT 17 X3CrTi 17 1.4510
X3CrTi17 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrTi 17 1.4510
2 ISO 4955-2005
X3CrTi17
3 EN 10296-2-2005
X3CrTi17 1.4510
4 ISO TS 15510-2003
X3CrTi17
5 EN 10297(2)-2005
X3CrTi17 1.4510
6 ISO 15510-2014
X3CrTi17 4510-430-35-I
7 ISO 9328-7-2018
X3CrTi17
8 ISO 4955-2016
X3CrTi17 4510-430-35-I
9 NF EN 10088-2-2005
X3CrTi17 1.4510
10 NF EN 10088-1-2005
X3CrTi17 1.4510
11 NF EN 10028-7-2008
X3CrTi17 1.4510
12 NF EN 10296-2-2005
X3CrTi17 1.4510
13 NF EN 10028-7-2000
X3CrTi17 1.4510
14 DIN EN 10296-2-2006
X3CrTi17 1.4510
15 EN 10088-2-2024
X3CrTi17 1.4510
16 EN 10028-7-2016
X3CrTi17 1.4510

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!