X3CrTi 17 1.4510 - EN 10088-1-2005

Grade	X3CrTi 17
European Standard Steel Grade	1.4510
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X3CrTi 17 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓑ	Cr	More
Minimum Value	-	-	-	-	-	16	Ti：[4 x (C+N)+ 0.15]~0.80 ⓒ
Maximum Value	0.05	1	1	0.04	0.015	18	Ti：[4 x (C+N)+ 0.15]~0.80 ⓒ

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization		Germany		France	European Standard
ISC	JIS	ASTM	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
S11863	SUS 430LX	S43035	X3CrTi 17	4510-430-35-I	X6CrTi 17 (X8CrTi 17)	1.4510	Z8CT 17	X3CrTi 17	1.4510

2 Approximate Comparison Table

Japan	United States		France	European Standard		Russia
JIS	ASTM	UNS	NF EN/NF	EN	Numerical Grade	GOST
SUS430LX	439	S43035	Z4CT17	X3CrTi17	1.4510	08KH17T

X3CrTi17 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X3CrTi 17 1.4510
2	ISO 4955-2005
	X3CrTi17
3	EN 10296-2-2005
	X3CrTi17 1.4510
4	ISO TS 15510-2003
	X3CrTi17
5	ISO 15510-2014
	X3CrTi17 4510-430-35-I
6	ISO 9328-7-2018
	X3CrTi17
7	ISO 4955-2016
	X3CrTi17 4510-430-35-I
8	NF EN 10088-2-2005
	X3CrTi17 1.4510
9	NF EN 10088-1-2005
	X3CrTi17 1.4510
10	NF EN 10028-7-2008
	X3CrTi17 1.4510
11	NF EN 10296-2-2005
	X3CrTi17 1.4510
12	NF EN 10028-7-2000
	X3CrTi17 1.4510
13	DIN EN 10296-2-2006
	X3CrTi17 1.4510

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!