S235J0 1.0114 - EN 10025-2-2004

Grade	S235J0
European Standard Steel Grade	1.0114
Corresponding Standard	EN 10025-2-2004 Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S235J0 Chemical Element Composition Content (%)

Component	C ^①	Mn	P ^②	S ^②③	Cu ^④	N ^⑤	More
Minimum Value	-	-	-	-	-	-	⑥
Maximum Value	0.17	1.4	0.03	0.03	0.55	0.012	⑥

S235J0 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	360~510	≥235	See Remarks
3≤t≤16	360~510	≥235	≥26
16＜t≤40	360~510	≥225	≥26
40＜t≤63	360~510	≥215	≥25
63＜t≤80	360~510	≥215	≥24
80＜t≤100	360~510	≥215	≥24
100＜t≤150	350~500	≥195	≥22
150＜t≤200	340~490	≥185	≥21
200＜t≤250	340~490	≥175	≥21

1 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q235C	SM400B	A284C A284D	E235C	St37-3U	E24-3	S235J0 Fe360C	1.0114	St3ps St3sp	1312	40C

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q235C (GB/T 700-2006)	U12358	SM400A (JIS G3106:2004)	Gr.65[240] (ASTM A573/A573M:2000)	E235C (ISO 630:1995)	S235J0 (EN 10025-2:2004)	1.0114

S235J0 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!