S235J2 1.0117 - EN 10025-2-2004

Grade	S235J2
European Standard Steel Grade	1.0117
Corresponding Standard	EN 10025-2-2004 Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S235J2 Chemical Element Composition Content (%)

Component	C ^①	Mn	P ^②	S ^②③	Cu ^④	More
Minimum Value	-	-	-	-	-	⑤
Maximum Value	0.17	1.4	0.025	0.025	0.55	⑤

S235J2 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	360~510	≥235	See Remarks
3≤t≤16	360~510	≥235	≥24
16＜t≤40	360~510	≥225	≥24
40＜t≤63	360~510	≥215	≥23
63＜t≤80	360~510	≥215	≥22
80＜t≤100	360~510	≥215	≥22
100＜t≤150	350~500	≥195	≥22
150＜t≤200	340~490	≥185	≥21
200＜t≤250	340~490	≥175	≥21
250＜t≤400	330~480	≥165	≥21

1 Approximate Comparison Table

2 Approximate Comparison Table

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q235D (GB/T 700-2006)	U12359	SM400B (JIS G3106:2004)	Gr.65[240] (ASTM A283/A283M:2003)	E235D (ISO 630:1995)	S235J2 (EN 10025-2:2004)	1.0117

S235J2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!