S275J2 1.0145 - EN 10025-2-2004

Grade	S275J2
European Standard Steel Grade	1.0145
Corresponding Standard	EN 10025-2-2004 Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
Classification	Carbon Steel

S275J2 Chemical Element Composition Content (%)

	Component	C	Mn	P ^①	S ^①②	Cu ^③	More
厚度t<40	Minimum Value	-	-	-	-	-	④
厚度t<40	Maximum Value	0.18	1.5	0.025	0.025	0.55	④

	Component	C	Mn	P ^①	S ^①②	Cu ^③	More
厚度t>150	Minimum Value	-	-	-	-	-	④
厚度t>150	Maximum Value	0.2	1.5	0.025	0.025	0.55	④

S275J2 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t＜3	430~580	≥275	See Remarks
3≤t≤16	410~560	≥275	≥21
16＜t≤40	410~560	≥265	≥21
40＜t≤63	410~560	≥255	≥20
63＜t≤80	410~560	≥245	≥19
80＜t≤100	410~560	≥235	≥19
100＜t≤150	400~540	≥225	≥19
150＜t≤200	380~540	≥215	≥18
200＜t≤250	380~540	≥205	≥18
250＜t≤400	380~540	≥195	≥18

1 Approximate Comparison Table

2 Approximate Comparison Table

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
Q275D (GB/T 700-2006)	U12759	SM490B (JIS G3106:2004)	Gr.70[290] (ASTM A573/A573M:2000)	E275D (ISO 630:1995)	S275J2 (EN 10025-2:2004)	1.0145

S275J2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!